TTAP
TTAP is a delay with two buffers. Each buffer features extensive controls for shaping the envelope of the delay sound, with another control set for glitchy pre-feedback repeats and warm pitch-bends. Inspired by both the classic sounds of tape delays and by experiments in editing and splicing tape, TTAP features a dedicated Section control for determining the maximum length of time of the second buffer. Section also acts as a virtual LFO control, affecting a number of modulation parameters. Both the Delay Time and Section controls in TTAP can either be synced to the host tempo, or run free, providing up to 3.0 seconds of time for each. Try changing the speed while TTAP is running with high feedback for the expanding/contracting doppler sound familiar to any dub lover (or automate and randomize the process using the Bend control). Features: Modeled by K-Devices
| Control | Default | Min | Max |
|---|---|---|---|
| Balance | 50.00% | 0.00% | 100.00% |
| Bend | * 1.00 | * 0.10 | * 2.00 |
| Cut | 0.00 | -1.00 | 1.00 |
| Envelope 1 | 0.00 | 0.00 | 1.00 |
| Envelope 2 | 0.00 | 0.00 | 1.00 |
| Feedback | 0.00% | 0.00% | 100.00% |
| Gap | 0.00 ms | 0.00 ms | 100.00 ms |
| Length 1 | 100.00 ms | 10.00 ms | 100.00 ms |
| Length 2 | 100.00 ms | 10.00 ms | 100.00 ms |
| Mix | 50.00% | 0.00% | 100.00% |
| Bend Modulation | 0.00% | -100.00% | 100.00% |
| Peak 1 | 0.50 | 0.00 | 1.00 |
| Peak 2 | 0.50 | 0.00 | 1.00 |
| Repeat | 0.00% | 0.00% | 100.00% |
| Reverse 1 | 0.00 | 0.00 | 1.00 |
| Reverse 2 | 0.00 | 0.00 | 1.00 |
| Section | 125.00 ms | 10.00 ms | 3000.00 ms |
| Spread | 0.00% | 0.00% | 100.00% |
| Stereo In | 0.00 | 0.00 | 1.00 |
| Time | 125.00 ms | 5.00 ms | 3000.00 ms |
| Warp 1 | 0.00% | -100.00% | 100.00% |
| Warp 2 | 0.00% | -100.00% | 100.00% |
| Wave 1 | 0 | 0 | 1 |
| Wave 2 | 0 | 0 | 1 |
| Recorder | 0.00 | 0.00 | 1.00 |